View PBPC305_337887.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PBPC301-PBPC307
Vishay Lite-On Power Semiconductor
3.0A Bridge Rectifier
Features
D D D D D D
Diffused junction High current capability Surge overload rating to 50A peak High case dielectric strength of 1500V Ideal for printed circuit board applications Plastic material has underwriters laboratory flammability classification 94V-0
14 406
D UL Listed under recognized component index,
file number E95060
Absolute Maximum Ratings
Tj = 25_C Parameter Repetitive peak reverse voltage g =Working peak reverse voltage =DC Bl ki voltage DC Blocking lt Test Conditions Type PBPC301 PBPC302 PBPC303 PBPC304 PBPC305 PBPC306 PBPC307 Symbol VRRM =VRWM =VR V Value 50 100 200 400 600 800 1000 50 3 2 -65...+125 Unit V V V V V V V A A A
Peak forward surge current Average forward current
TC=50C, mounted on metal chassis TC=50C, mounted on PC board FR-4 material
IFSM IFAV IFAV Tj=Tstg
Junction and storage temperature range
C
Electrical Characteristics
Tj = 25_C Parameter Forward voltage Reverse current I2t Rating for fusing Diode capacitance Thermal resistance junction to case Test Conditions IF=1.5A TC=25C TC=100C VR=4V, f=1MHz Type Symbol VF IR IR I2t CD RthJC Min Typ Max 1.2 10 1 10 Unit V
mA
mA A2s pF K/W
55 25
Rev. A2, 24-Jun-98
1 (4)
PBPC301-PBPC307
Vishay Lite-On Power Semiconductors Characteristics (Tj = 25_C unless otherwise specified)
IFAV - Average Forward Current ( A ) 3.0 IFSM - Peak Forward Surge Current ( A ) 60 50 40 30 20 10 0 1.0
Tj = 50C Single Half Sine-Wave (JEDEC Method)
Mounted on Metal chassis
2.0
Mounted on PC Board
1.0
Resistive or inductive load
0
15709
25
50
75
100
125
15711
10 Number of Cycles at 60 Hz
100
Tamb - Ambient Temperature ( C )
Figure 1. Max. Average Forward Current vs. Ambient Temperature
10 IF - Forward Current ( A )
Figure 3. Max. Peak Forward Surge Current vs. Number of Cycles
10 IR - Reverse Current ( m A )
Tj = 100C
Tj = 25C IF Pulse Width = 300 s
1.0
1.0
0.1
0.1
Tj = 25C
0.01 0
15710
0.4
0.8
1.2
1.6
15712
0.01 0 40 80 120 Percent of Rated Peak Reverse Voltage (%)
VF - Forward Voltage ( V )
Figure 2. Typ. Forward Current vs. Forward Voltage
Figure 4. Typ. Reverse Current vs. Percent of Rated Peak Reverse Voltage
2 (4)
Rev. A2, 24-Jun-98
PBPC301-PBPC307
Vishay Lite-On Power Semiconductor Dimensions in mm
14478
Case: molded plastic body Polarity: marked on body Approx. weight: 3.8 grams Mounting: through hole for #6 screw Mounting torque: 5.0 Inch-pounds maximum Mounting position: any Marking: type number
Rev. A2, 24-Jun-98
3 (4)
PBPC301-PBPC307
Vishay Lite-On Power Semiconductors Ozone Depleting Substances Policy Statement
It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances ( ODSs ). The Montreal Protocol ( 1987 ) and its London Amendments ( 1990 ) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2 . Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency ( EPA ) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C ( transitional substances ) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances.
We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay-Telefunken products for any unintended or unauthorized application, the buyer shall indemnify Vishay-Telefunken against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 ( 0 ) 7131 67 2831, Fax number: 49 ( 0 ) 7131 67 2423
4 (4)
Rev. A2, 24-Jun-98

▲Up To Search▲

Price & Availability of PBPC305

	To Download PBPC305 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .